1 / 7
Fan Duct Reducer - 120mm Fan to 110mm — image 1
1 / 7

Fan Duct Reducer - 120mm Fan to 110mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Needed to use a 120mm fan with a smaller diameter tube (110mm).

Rating
0 / 5
Likes
17
Downloads
162
Makes
0
Views
923
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

I assembled an enclosure for my 3D printer and wanted to lead the toxic exhaust out of the house. I intended benefit from...

  • a large fan for its power and potential of running more silent than a smaller fan
  • smaller diameter tubes rather than large ones catching the eye.

I chose the diameter of 110mm, because here in Germany there is a wide range of 110mm tubes available for plumbing purposes. I purchased a "110mm to 50mm" adapter to then be able to use the handy "DN 50" tubes, which are fun to combine for any individual lengths and angles.

The adapter I went for: Marley HTR DN 110/50

I connected a 50mm flexible tube ("Flexrohr") to add more flexibilty to the installation.

 

You should rotate the piece with the flat side to the printing bed.

Sliced in Cura.
I used a 0.4mm nozzle and no special slicer settings.

The 4mm holes on the side are meant to screw the reducer to the tube that you put in it. In my case this isn't necessary since it's already a tight friction fit.

Personal remark: I have only used the 0.4 nozzle, because the printer was equipped with it from stock. Before, I've started to use 0.6mm or 0.8mm and recommend trying these. It's much faster and for functional parts like this one, super fine details are just unnecessary.

Tags