Protector dental hook
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.09 net (excluding VAT)
For file: Protector Dental Hook_0.15mm_PLA_MINI_6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 5.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
After I had pricked myself for the tenth time, it was time to make a protector.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 23
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
On my worktop I have a dentist's hook standing upright. After I had pricked myself for the tenth time, it was time to make a protector.
The protector should be easy to remove. Since the hook is made of metal, a magnet can be used.
Required material,
- a magnet of 5x1.6mm
- 0.53 gram = 18cm filament
I have attached a photo with the hook on a 1mm horizontal grid 5mm vertical grid so you can see if your hook will fit. Otherwise, the sizes in Prusa Slicer are easy to adjust.
Happy printing