1 / 5
Disapproving Eraser (2U Backspace) Keycap (Cherry MX, multi-material)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Disapproving Eraser is disappointed in your typing mistakes!
- Rating
- 0 / 5
- Likes
- 64
- Downloads
- 158
- Makes
- 0
- Views
- 1,043
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This Cherry MX-compatible 2U Backspace keycap is disappointed in your typing mistakes! It's supposed to look like an old school (pink rubber) eraser but it won't look like that right off the printer... To solve that problem you have to sand it. Roughly! An oscillating sanding tool with a low grit (e.g. 80) pad works best but elbow grease and patience also work fine.
In the included images there's a picture of one that's been sanded (left) and one that hasn't (right). The one that's been (roughly) sanded looks way more like a normal eraser.
NOTES
- It only has two stems! Why? Because the angle of the “eraser” is too steep to be able to fit a stem there. I used it for almost a year though so I know it works just fine 👍
- 0.16mm or finer resolution layer height is recommended.
- When sanding be real rough! If it looks a bit fuzzy with scratches here and there that's what an eraser looks like! Perfect 👌
- Imperfections in the print make it look even more realistic!