1 / 4
Monitor shelf / Polička na monitor — image 1
1 / 4

Monitor shelf / Polička na monitor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.20 – €0.24 net (excluding VAT)

For file: Policka_monitor_Star_Knob_0.6n_0.3mm_PLA_MK3S_12m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.22 excluding VAT (range midpoint).

Weight reported by the author
3 g
Print time reported by the author
12.6 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Shelf to put on monitor for some necessities / Polička k umístění na monitor pro odkládání některých nezbytností

Rating
4.75 / 5
Likes
173
Downloads
554
Makes
4
Views
6,655
Reviews
4

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

EN: The model consists of 4 printed parts, its own shelf (for a better result, it is printed in two parts that are then glued together), a support leg and tightening nuts (into which a screw and a size 10 nut are inserted). I personally printed from PLA Prusament using a 0.6 nozzle in 0.3mm quality.

CZE: Model se skládá ze 4 tištěných částí, vlastní poličky (pro lepší výsledek se tiskne na dvě části, které se následně slepí), podpěrné nohy a utahovacích matic (do kterých se vkládají šroub a matka velikosti 10). Já jsem osobně tisknul z PLA Prusament pomocí trysky 0.6 v kvalitě 0.3mm.

Tags