1 / 2
Kobra Go Side Filament Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to have my spool more inline so this is what I came up with. I just used 2 good wood screws for attaching the…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 95
- Makes
- 1
- Views
- 558
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to have my spool more inline so this is what I came up with.
I just used 2 good wood screws for attaching the factory spool arm, then push the first slot tooth into the bar slot at an angle then push down flat to engage the second inner slot tooth. Easy Peasy!
Print on its side so you don't need any supports.
Print Settings
Printer:
Kobra Go
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
at least 20%
Filament:
N/A PLAN/A Post-Printing =============
Category: 3D Printer Accessories