1 / 3
Mercedes SLK MAF Relocate Adaptor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to help move the MAF in a pre facelift the R170 SLK 230 Kompressor to a horizontal position.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 58
- Makes
- 0
- Views
- 1,009
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This solution is 100% reversible and non destructive. Use it to hold the male end of the 90' elbow into the intercooler outlet. Requires a couple long ~35mm M3 bolts and nylock hardware.
I printed with an .8mm nozzle 2mm minimum wall thickness and 50% infill PETG with the highest glass transition temperature I could find. If I had the capability, I would reprint in Nylon but…
So far nothing has melted under the hood. technically if the post intercooler intake air temperature exceeded 75C. this might melt.
