Auto-Z mount for a CR-10S with Solid Bed Mounts + Nozzle brush holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bed mount for an auto-Z switch and a nozzle brush on a CR-10S with solid bed mounts.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 46
- Makes
- 0
- Views
- 588
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This is a remix of oldcrazyeye's Ender 3 auto-z clamping bed mount.
I've modified it for my CR-10S bed which has the TH3D solid bed mounts. It has also been modified to hold both the auto-z switch and a nozzle brush holder.
Needs:
- 5 heatset inserts
- 9 m3 screws (sorry I can't remember the exact lengths)
- 4 m3 nuts
Note: My setup is not a standard CR-10S; therefore modifications for your needs may be necessary. I have a CR-10S with solid bed mounts from TH3D, a X axis linear rail kit from TinyMachines, a Klemco mount for E3D V6. Both of these push the hot end out front more. My entire upper assembly was moved back around 35 mm to adjust for this so that I could reach the back of the bed. It was a little bit of work but well worth it with KevinAkaSam's KlackEnder.
KlackEnder Probe by KevinAkaSam:
https://www.printables.com/model/332025-klackender-probe
The auto-z switch housing I'm using (with a 3/16" binding screw from Home Depot and an Omron switch - use sandpaper to get it working smoothly):
https://www.printables.com/model/236608-voron-24-binding-screw-z-endtop-mod
Change log:
2023-03-01
- Added clamp for BLV Ender 3 bed
- Right side holds brush
- Left side holds the switch
- Added mirrored brush holder (allow sliding away from switch for the BLV bed)
- Added a mounting bracket for the Unklicky Z endstop