1 / 2
Attic Ladder Hook
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hook to be attached to pole, to pull down attic ladder
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 95
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a hook used to pull down an attic ladder. The hook needs to be fitted to a wooden dowel (22mm diameter, 1 to 2 metres long (that's ~7/8" diameter, 3-6 feet long for Americans)). Its a tight fit, but I also used drilled a hole through the side, and used a small screw to fasten the hook to the pole to be sure.
I printed in PLA with support and 20% infill. Wall thickness: 1.6mm (4 shells) seems to be strong enough.
Post-Printing
I sanded the hook, undercoated and spray painted with hammer finish paint.