PBS-1 Airsoft mk2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bit over 5 years ago I made "PBS-1 Airsoft" and it is still by far my most popular design. It is time to update it!…
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 376
- Makes
- 1
- Views
- 1,458
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
A bit over 5 years ago I made "PBS-1 Airsoft" and it is still by far my most popular design. It is time to update it! Update is both visual and quality of life. It's cross compatible with my earlier design.
Fully assembled "long" version is about ~200mm long, Short one is ~156mm. After printing you can add foam or other silencing materials.
Visually now it has the groove at the base, in the front "rods" are now sticking out. QoL upgrades: original base is split in two for easier printing and to make the part that threads on the barrel smaller, baffle is now separate for easier replacement in case of baffle strike.
[Edit 31.10.23] Added ThereadedMiddle, just add MP5k thread adapter and you can screw on your own supressor or tracer unit. Max outer diameter is 34mm, max length is ~120mm for Top_Long and ~75mm for Top_short.
Category: Sport & Outdoors