1 / 1
Iris Compass shim
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A shim for the Iris Compass that might be needed if the leafs jump out of the tracks.
- Rating
- 4.667 / 5
- Likes
- 17
- Downloads
- 134
- Makes
- 4
- Views
- 1,808
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This is just a shim that was needed in my case for the iris to work properly.
There are no special print settings, I used 0.3 mm layer height.
The material doesn't matter.
After printing check for any bumps or defects and sand them. You want the smoother side of the print touching the leafs.
It has to be glued inside the outer ring that has the tracks. Everything must be aligned: the iris “eye” and the tracks.