Watchband Spring Bar Remover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
05/06/18: added fusion360 files This is a copy of the Watchband Spring Bar Remover Tools you can find on eBay.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 19
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
05/06/18: added fusion360 files
This is a copy of the Watchband Spring Bar Remover Tools you can find on eBay.
Post-Printing
After printing you need two m6 and one m5 screw with a washer. Just thread the printed holes and insert the screws like in the picture.
The outer diameter of the spring is approximately 7mm and the inner 6mm.
For the inserts I used two "Watch Band Strap Spring Bar Link Pin Remover Repair Tool" from eBay for about a dollar each. Just saw them in half an press them into the slots. I warmed the PLA a bit to get them in there snuggly.
Category: Hand Tools