Wall-Mount Torch Lamp - socket B22
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.06 – €2.52 net (excluding VAT)
For file: lumba_torch-B22-Socket_PETG_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.29 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2.59 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix to use B22 socket
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
The original model is great, but I have B22 sockets so I had to adapt it.
A few other changes :
- Cover may be fastened to the base plate with M2.5 and hex nuts
- Cover has an internal groove to fix the glass, so it may be used “pointing down”
- Glass is longer by a few centimeters, since B22 light bulbs are longer than GU10
- Glass as an added notch to clip into the cover's internal groove
- Glass is no more open-ended
Note you will have to shorten two of the “legs” of the glass, otherwise it will not go fully into the cover (same problem with original model) : a small part of the backplate blocks those two legs.
Backplane and glass should be printed in PETG ; cover may be printed in PLA or PETG.