MESA Blaster - Talon Mag Conversion Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed customized 3d parts for the MESA blaster available from Shan Engineering on Etsy. Get the base files and…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Remixed customized 3d parts for the MESA blaster available from Shan Engineering on Etsy. Get the base files and instructions from there!
I printed at 2.0mm walls and 25% infil, but you could probably use less.
I'm still tweaking files, so any notes you have would be appreciated!
Primary pieces:
1 - Shortened Magwell - Designed for Talon magazines
2 - Extended Mag Release to reach the Talon's higher mounting point
3 - Extended Plunger tube back cap
To get the additional stroke functioning:
1 - You will need to shorten the priming bars approximately 34mm to make up for how far forward the front of the plunger was moved.
2 - You may need to make new holes for the plunger tube front approximately 34mm forward of their position on the original schematics.
3 - (optional) A 3rd set of screw holes are provisioned on the plunger back cap. These should end up 3" from the rear of the angle iron. I haven't needed them, but they are there.
Optional pieces
1 - Extended plunger rod (the base MESA files also include an spacer for this, but I wanted one piece)
2 - K25 spring retainer (K25 had a perfect frequency and weight for me, but the base Longshot and McMaster retainers didn't quite control it, so I made my own. This is designed for the extended plunger rod above, and will interfere with catching on the base fileset.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
25%
Category: Sport & Outdoors