TireLinc RV factory TPMS repeater dock cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Covers for a TireLinc factory installed TPMS repeater dock on RVs
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Covers which fit a popular factory installed RV TPMS repeater dock. The base dimensions are roughly 3"x2.6". There is an 18 degree cover for docks installed at an 18 degree angle so the top face can be vertical. There is a 0 degree cover for docks that are mounted vertical.
This will cover the exposed 12V DC pins on the dock. The top can be drilled. There is an access cutout on one side of the dock. The smaller cutout fits around the dock orientation registration protrusion.
PETG is flexible enough to not crack while squeezing the sides.
Supports will likely be needed for the locking ears.