1 / 12
Universal Night Light Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a universal base for night lights with a rechargable battery and a microUSB connector.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 55
- Makes
- 0
- Views
- 455
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a universal base for night lights with a rechargable battery and a microUSB connector.
Just connect this base to your phone charger, then disconnect it and use it wherever you want with your preferred lamp shade.
Print instructions
Parts
- 4x 10x1 mm magnets
- 1x 330 Ohm resistor
- 1x LED
- 1x Switch
- 1x TP4056 charger
- PCB
- 1x 20mm coin cell holder
- 1x LIR2032 rechargable battery
- wires
Assembly
- Glue the magnets to the base and to the lid.
- Solder the wires to the switch.
- Push the switch into its place from the outside.
- Push the LED pins from the top.
- Solder the wires and the resistor to the charger PCB board, to the battery holder and to the LED pins (check the polarity).
- Push the battery holder and the charger PCB into their place from top. No glue needed, they are designed to be snap-fit.
Enjoy :)