TPU PETG Mix with MMU2S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After many "try and cry" attempts: I succeeded in combining PETG and TPU and printing it with the MMU2S.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 27
- Makes
- 0
- Views
- 2,791
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
After many "try and cry" attempts:
I succeeded in combining PETG and TPU and printing it with the MMU2S.
I made a smartphone flip case for a Samsung J7 and a Xiaomi Mi A2.
The outer layer is printed with PETG (turquoise), the case with TPU (semisoft, white).
The connecting bridge ist only 2 layers thick. The second layer is wider so the two filaments stick together perfectly.
The TPU and PETG stick together surprisingly well. I couldn't scratch one layer off the other.
I will add descriptions and infos about the settings in PrusaSlicer later. Loosing the idler was necessary...
And of course will add a gcode-Testfile (no use in printing it when you don't own a J7 and a A2...).
Print instructions
... tbc ...