Lexus keycaps
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.26 – €1.54 net (excluding VAT)
For file: 5D-Cap-LEXUS-ASSY_0.2mm_PLA_MINI_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.40 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lexus keycap for Cherry switches.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
These keycaps provide a vehicle logo and are numbered 0-9. There is a color change break in the slicing when done on a Mini.
There are some other keycaps I make for this competition.
The Cherry center post does not extend to be flush with the bottom, so I added a support under this post. If the post support pulls off the print bed, add a raft.