Customisable - Bookbinding awl insert - 20mm spacing default - openscad

Fits inside the 8.5" cradle - Available at - https://www.thingiverse.com/thing:3766352

Designed for A4 paper folded to A5. Has spacing for awl positioned every 20mm with a border of 15mm at each end.

I am using this where I cut 5mm off of the top/bottom edges meaning that the holes end up 10 mm from top and bottom of the page but will work with out trimming .

I have marked this as a remix so people can find this but reality is that I made it from scratch just from measurements of cradle.

I have included the openscad file, there are 4 variables that need to be changed in order to modify the spacing:

first_edge_offset = how much of a gap from first edge

spacing=gap between the rest of the holes

stoplen=when to stop - 210 is a5 long side

awldia= size of awl if you want bigger or smaller If you are unable to modify then let me know what you are looking for and I can make one for you.

Print instructions

Category: Art Tools Summary

Fits inside the 8.5" cradle

Designed for A4 paper folded to A5. Has spacing for awl positioned every 20mm with a border of 15mm at each end.

I am using this where I cut 5mm off of the top/bottom edges meaning that the holes end up 10 mm from top and bottom of the page but will work with out trimming .

I have marked this as a remix so people can find this but reality is that I made it from scratch just from measurements of cradle.

I have included the openscad file, there are 4 variables that need to be changed in order to modify the spacing:

first_edge_offset = how much of a gap from first edge spacing=gap between the rest of the holes stoplen=when to stop - 210 is a5 long side awldia= size of awl if you want bigger or smaller If you are unable to modify then let me know what you are looking for and I can make one for you.

Print Settings

Printer Brand: Creality

Printer: CR-10 Mini

Rafts: No

Supports: No

Resolution: 0.3

Infill: 20%