1 / 3
Flux Capacitor Keycap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If we could somehow harness this lightning... channel it into the flux capacitor... it just might work.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 47
- Makes
- 0
- Views
- 688
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
The Idea:
- the prominent Flux Capacitor from the Back to The Future saga
- minimalist design
- Cherry-MX stem and DSA inspired (original Cherry design drawing)
Design Process:
- different stages of the design (and my amateur painting skills)
- the stem is flush with the outer walls and has a radius at the top to support the top of the cap and minimize bridging
- 0.4 mm Nozzle was not feasible for such small details
Overall dimensions:
| weight | height | width | depth |
| 1 g | 8 mm | 18 mm | 18 mm |
- size comparison left DSA right SA R3
Print recommendations:
- 0.3 mm Nozzle
- 0.1 mm Layer height
- 100% Infill
- 98% Flow (better keep it on the low side for these small features)
- PLA
Orientation:
- stem on the built plate
Post Processing:
- cleaning the bottom edge
- painting
- Back to the Future marathon