RAPMAN 3.1 MOD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The BITS FOR BYTES RAPMAN 3,1 3D PRINTER
Three hotend driver boards
Triple fillermint hotend in place
Triple filament feeder to mount to the right
Firmware done
Howdini printer 500mm x 500mm x 850
Current Repetier-Firmware-2020-01-03 ZIP FILE
with MKS GEN-L 1.0 CONTROLLER BOARD three hotends to change to mixing extruder to
print space 350mm x 430mm x 900
Assembled parts are at full scale to picture
Carriage from RAPMAN 3,1 3D PRINTER
Print table and bottom table plate from RAPMAN PRINTER
Top round bars
2 x 12 mm and 2 x 8 mm from RAPMAN PRINTER
2 x 630 mm round bars for Carriage
Bearing blocks from https://www.thingiverse.com/thing:71823
or https://www.thingiverse.com/thing:12817
m5 threaded bar x 8 length 1 meter
m5 threaded bar x8 length 0.475 meter
12mm x 12mm x1.200 meter aluminium square tube
Category: 3D Printing