1 / 1
Mini / Mini+ First layer Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 25mm square single layer test print for checking your 1st layer calibration.
- Rating
- 4.909 / 5
- Likes
- 59
- Downloads
- 1,378
- Makes
- 8
- Views
- 4,186
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
A 25mm square single layer test print for checking your 1st layer calibration.
For minimum clean up there is no brim, and a small handle to pull the print off the bed without removing the sheet.
g-code for both PLA and PETG
Two versions of g-code are now included with preheat for the original MINI with the MINDA, and without preheat for the MINI+ with a SuperPINDA.
The g-code with preheat uses start code by dennisscholing https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/309