Träger für Schild-Befestigung an D80 / Update +Schild Motorrad-Parkplatz
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Träger für Schild-Befestigung an D80 / Update +Schild Motorrad-Parkplatz
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 111
- Makes
- 0
- Views
- 715
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Träger für Schild-Befestigung an D80 / Update +Schild Motorrad-Parkplatz
Update Schild Motorrad-Parkplatz
Wer seinen Drucker auf ca. halber Höhe (ab. 1,0mm bis 1,4mm) anhalten und das Filament wechseln kann spart sich ein anschließendes anmalen der erhabenen Zeichen.
Gedruckt, Mat: PLA ( ABS, PETG, PC oder Tpu auch denkbar)
Füllung Empfehlung:15% - 100%
Dann aufgeklebt und mit 3 Kabelbindern an einen 80mm Rohr befestigt.
Getestet, funktioniert gut.
****************************************************************************
google translated:
Carrier for sign attachment to D80 / Update + motorcycle parking sign
Motorcycle parking update sign
If you can stop your printer at about half the height (from 1.0mm to 1.4mm) and change the filament, you save yourself having to paint the raised characters afterwards.
Printed, Mat: PLA (ABS, PETG, PC or TPU also possible)
Filling recommendation: 15% - 100%
Then glued on and attached to an 80mm pipe with 3 cable ties.
Tested, works fine.