1 / 4
Brompton "Easy" Wheels — image 1
1 / 4

Brompton "Easy" Wheels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This design includes improved wheels & mounting bracket to make it easier to roll around your Brompton bike when folded.

Rating
5 / 5
Likes
16
Downloads
76
Makes
1
Views
1,729
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

This design includes improved wheels & mounting bracket to make it easier to roll around your Brompton around when folded.

The wheels are a bit larger in diameter than the standard transport wheels so they move better over uneven surfaces, door thresholds, etc. The rear carrier makes it more stable as well.

The bracket replaces the single wheel on the rear fender and adds two of the larger wheels. This makes a huge improvement over the standard setup.

Note: These wheels can only be installed directly on the rear triangle of the older Bromptons that have conical shaped wheels. That said, you can still replace the single wheel on the rear fender of the newer style bikes with the carrier and two wheels. If anyone is interested in a version for the newer Bromptons let me know. I can get access to one for sizing and I will add it here.

.STEP files are included for all the designs.

Printing:

I printed the wheels in PLA (cuz I had the color I wanted) and that works fine though PETG or something else would hold up longer if you leave your bike out doors a lot. I printed the Fender Carrier with PETG.

The hubs and tire don't need any support. There is a thin bit you will need to cut out of the axle hole of the hubs.

The Fender Carrier does need support to the build plate only.

Assembly:

Wheels:

The hubs and tire just press together. There is no need to glue them.

Use the existing screws to attach the “front” wheels to the rear triangle.

Fender Carrier:

The rear carrier attaches to the fender with the same screws that hold the standard wheel. You will need a ¼" (6mm) X 3-½" (90mm) bolt to act as an axle with a nylon lock nut.

If you print the “spacer” version of the rear carrier you will also need two 3/8" OD  (10mm) X ¼" (6mm) ID  X 1" (25mm) steel spacers. 

Tags