1 / 1
LogiLink UA0041 2.5" USB SATA enclosure to VESA (Pi case/Thinclient) — image 1

LogiLink UA0041 2.5" USB SATA enclosure to VESA (Pi case/Thinclient)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These holders are meant to be slid onto a LogiLink 2.5" external SATA enclosure to then attach the drive to VESA 75x75mm

Rating
0 / 5
Likes
2
Downloads
15
Makes
0
Views
241
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

I made this model in order to attach an SSD in my LogiLink UA0041B USB enclosure to my Raspberry Pi. 

Since the Pi's case supports VESA mounting, I made it so that two of these holders could simply be slid onto the enclosure. When spaced properly, the VESA mounting holes could be used to secure both together (as seen in the FreeCAD file).

There are also two holes in the top to attach the bundle to the underside of a shelf, for example.

The only post-processing that is needed is tapping M4 threads into the VESA holes and screwing your choice of miniPC/Pi/whatever to it.

If you want to use the top holes to mount it to a shelf, these will need to be countersunk.

The clips will need to be attached to the shelf first, as mounting the Pi blocks you from accessing these holes.

Tags