Honeycomb Wall SV06
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.84 – €4.70 net (excluding VAT)
For file: Sovol SV06 Honeycomb Wall - 0.4mm nozzle, PLA, 3h~ / hsw_wholebed_03mm_pla_sv06_2h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.27 excluding VAT (range midpoint).
- Weight reported by the author
- 81 g
- Print time reported by the author
- 2.95 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Honeycomb wall for 220x220mm beds
- Rating
- 5 / 5
- Likes
- 672
- Downloads
- 5,761
- Makes
- 15
- Views
- 21,993
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This fits a 220x220 bed. Made it for my sovol sv06 but will work on any printer with this bed size.
The Gcode is for a 0.6mm Nozzle, printing at 235 Nozzle Temp and 75 Bed Temp. Using Arachne this would put spots all over the bed in the first layer, they didnt stick with my layer. So i used the classic engine and tweaked line width.
I avoided crossing perimeters, which is good if you retraction settings arent perfect, which using PETG often are not.