Adapter to make cheap pan+tilt servo bracket mount work for heavy camera
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cheap pan+tilt servo bracket mount has problems with heavy (55g) camera mounted in intended direction.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 28
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Cheap pan+tilt servo bracket mount has problems with heavy (55g) camera mounted in intended direction. For placing center of mass above turn point of camera holder, just mount camera the other way around with provided adapter. OpenSCAD bottom part clips firmly into servo camera bracket, the top part can be adapted for any camera easily.
The model as is is for Arducam varifocal lens (zoom and focus) with IRcut and 8MP camera:
https://www.uctronics.com/arducam-ptz-pan-tilt-zoom-8mp-camera-for-raspberry-pi.html
prusa3d forum thread, with additional 80mm diameter base plate:
https://forum.prusa3d.com/forum/english-forum-awesome-prints-hall-of-fame/making-cheap-pantilt-servo-bracket-mount-work-with-heavy-camera/#post-639052
Original forum thread related to this model, discussing software, experimental determination of zoom factor 3×, 3Dprinting adapter, …:
https://forums.raspberrypi.com/viewtopic.php?p=2083616#p2083616