Fiero Console Glovebox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This assembly replaces the original glovebox that is attached to the vertical door on the center console.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
My glovebox shattered. This assembly replaces it with a printable version that provides a tiny bit more room and would be easy to print since it is “boxy” and not curved like the factory glovebox. Note that only one wedge is shown; you will need to print two wedges, one for each side. Also, the design include pins with caps for the holes so you can solidly glue the parts together and maintain alignment. The pins fit into the holes and the caps fit on the pins, trapping the parts between them; or you may use bolts/nuts if you prefer. The pins/caps are optional if you believe glue is sufficient to hold the parts.
Print using a thermally stable plastic, like PETG, ABS, etc. PLA would probably work since it won't be in sunlight yet I would recommend something stronger. Use an appropriate glue for the plastic you are using, such as cyanoacrylate (super) glue for PETG.