KUNA laptop stand with 15mm clearance
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.77 – €0.94 net (excluding VAT)
For file: kuna_circle_stand_15mm_clearance_06mm_nozzle_03.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.85 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 41.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large.
- Rating
- 4.842 / 5
- Likes
- 347
- Downloads
- 3,038
- Makes
- 43
- Views
- 10,098
- Reviews
- 38
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with the thermals when gaming.
So I redesigned it in Fusion 360 in the same shape as the original but with a support circle radius of 20mm instead of 40mm and a 15mm laptop clearance instead of 10mm.
Print instructions
Printed with 0.6mm nozzle at 0.3mm resolution with 20% infill. I used the 0.6mm nozzle since the modell doesn't really need any fine detail. 0.4mm nozzle at 0.15-0.2 should work fine.