Green Lantern - luminous

my son ask for a green lantern luminaire, that can switch on when the ring comes near

here are the result

I designed many parts that can be glued together.
Support printing is only needed for the half spheres, I don't know if other placement work without support.
I print the diffusor planes in neon green so the inner white LEDs shines in green. I put a reed switch in one reflector and another under the top side. So the light can switched on when the magnetic ring comes in the reflector and if you put the ring on the top of the lantern.

Detailed instructions on youtube:
https://youtu.be/zFRIyOHx\_8M

hint:
The placement of the parts below is not for all the best printing position, please rotate to optimize printing.

Print instructions

Category: Gadgets Summary

my son ask for a green lantern luminaire, that can switch on when the ring comes near

here are the result

I designed many parts that can be glued together.
Support printing is only needed for the half spheres, I don't know if other placement work without support.
I print the diffusor planes in neon green so the inner white LEDs shines in green. I put a reed switch in one reflector and another under the top side. So the light can switched on when the magnetic ring comes in the reflector and if you put the ring on the top of the lantern.

Detailed instructions on youtube:
https://youtu.be/zFRIyOHx\_8M

hint:
The placement of the parts below is not for all the best printing position, please rotate to optimize printing.

Print Settings

Printer Brand: XYZprinting

Printer: da Vinci mini w

Resolution: 0.2

Infill: 30

Notes:

I print support for the half spheres, all other parts don't need support.

Custom Section

how to make a green lantern