MacBook Holder for Apple Studio Display F360
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps a MacBook vertically on the back of the Apple Studio Display. Fusion 360 file.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 374
- Makes
- 1
- Views
- 2,314
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
The holder clips securely and snugly into the slot and onto the sides of the monitor's stand. There are vent holes for airflow, but I recommend you orient your computer such that the computer's vents are upward in free air. The holder's main body may seem thick, but that is by design to keep the monitor's cable strain relief as straight as possible. Feel free to adjust if you wish.
The Fusion 360 file has parameters so you can adjust the computer slot width, the corner radii, and the tolerance for fit depending on your printer. By default the slot is 15.5mm which is good for my computer, MacBook Pro 2019, and the tolerance is 0.2mm, which on my printer makes a perfectly snug fitting part.
Print settings or material aren't critical for this part. You will need supports from the build plate only. I used PETG, 0.25mm variable layer height, 15% rectilinear infill.