1 / 6
Bosch GKS 18V-57 G Absaugadapter (easy print) — image 1
1 / 6

Bosch GKS 18V-57 G Absaugadapter (easy print)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Da mein Staubsaugerschlauch nicht in den beiliegenden BOSCH Adapter passte und ich eh gern ein Ersatzteil haben…

Rating
5 / 5
Likes
16
Downloads
162
Makes
1
Views
1,785
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Da mein Staubsaugerschlauch nicht in den beiliegenden BOSCH Adapter passte und ich eh gern ein Ersatzteil haben wollte, habe ich mal einen Adapter von Null konstruiert.
Ich habe euch die Step Datei beigelegt, damit ihr es an euren Schlauchdurchmesser anpassen könnt.
Den kleinen Haken einschieben bis er auf der Rückseite bündig sitzt und mit etwas Kleber fixieren.

Since my vacuum cleaner hose did not fit into the enclosed BOSCH adapter and I wanted a spare part anyway, I designed an adapter from scratch.
I enclosed the step file so that you can adapt it to your hose diameter.
Insert the small hook until it is flush on the back and fix it with a little glue.

Print instructions

Da mein Staubsaugerschlauch nicht in den beiliegenden BOSCH Adapter passte und ich eh gern ein Ersatzteil haben wollte, habe ich mal einen Adapter von Null konstruiert.
Ich habe euch die Step Datei beigelegt, damit ihr es an euren Schlauchdurchmesser anpassen könnt.
Den kleinen Haken einschieben bis er auf der Rückseite bündig sitzt und mit etwas Kleber fixieren.

Since my vacuum cleaner hose did not fit into the enclosed BOSCH adapter and I wanted a spare part anyway, I designed an adapter from scratch.
I enclosed the step file so that you can adapt it to your hose diameter.
Insert the small hook until it is flush on the back and fix it with a little glue.

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0,3

Infill: 20

Filament: any PLA any Post-Printing

Der Spalt um den Haken ist nur 0,06mm. Auf meinem Prusa passt er super ohne Probleme straff hinein. Sollte es bei euch zu eng sein, schleift den Haken mit Sandpapier etwas ab.

The gap around the hook is only 0.06mm. On my Prusa it fits tightly in without any problems. If it is too tight for you, sand the hook a little with sandpaper.

Tags