Ironing board hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple hook for a small ironing board with 20mm diameter tubular frame.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Background
I have a small ironing board and its tubular steel frame is about 20mm in diameter. I wanted a simple hook I could screw to a stud in the wall.
I was inspired by this design: https://www.printables.com/model/271354-ironing-board-hook but its hook was designed for a 10mm frame. So I started from scratch.
Design
This design features a 20mm hook with some beveling to help align the board to the hook. It has two 3mm holes to accommodate screws with 45 degree beveled heads. I used simple drywall screws, after drilling out the 3mm holes to a slightly larger size.
Printing
It should print well laid on one of its sides and shouldn't need supports. I printed with variable layer heights so that the screw holes would come out nicer. Ironing boards aren't heavy, but I still printed with 1mm side thickness, 4 shells and 15% infill.