Mini Trichter mit Entlüftung / Mini funnel with vent
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.84 – €1.03 net (excluding VAT)
For file: Mini_Trichter_v2_0.2mm_PLA_MK3S_1h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mini Trichter mit Entlüftung zum auffüllen Flaschen oder ähnliches. Mini funnel with vent for refilling bottles or the
- Rating
- 4.667 / 5
- Likes
- 18
- Downloads
- 538
- Makes
- 3
- Views
- 1,331
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mini Trichter mit Entlüftung zum auffüllen Flaschen oder ähnliches.
Durch Entlüftung wird Blasenbildung verhindert und somit kein blubern und spritzen.
Update - 23.02.2023
Jetzt braucht man keinen Support mehr.
--------------- ENGLISH --------------
Mini funnel with vent for refilling bottles or the like.
Bubble formation is prevented by venting and thus no bubbling and splashing.
Update - 23.02.2023
Now you no longer need support.
Print Settings:
Printer: Bambu Lab X1C
Print time: 38 min.
Filament: Geetech PLA White
Resolution: 0.2 mm
Infill: 15%
Brim: No (if you want)
Rafts: No
Supports: No (if you want)