1 / 2
Chopstick Rest - Curved Beam, Stable, Japanese Woodworking Style — image 1
1 / 2

Chopstick Rest - Curved Beam, Stable, Japanese Woodworking Style

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Inspired by Japanese woodworking, this chopstick rest curves and tapers down to a rounded cross-section; simple, stable.

Rating
0 / 5
Likes
20
Downloads
43
Makes
2
Views
263
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

-This model is best printed on its smallest side to avoid using supports (all 4 long faces have curvature). There is limited flat surface area on this model.
-The opposite smallest side (top, as-printed) needs to be printed with multiple perimeters in order for it to be solid. I originally tried printing this model in vase mode and was not happy with the ‘slot’ gaps along this opposite smallest side.
-The .3mf file and gcode contain an internal diaphragm near the center of the chopstick rest; this is not necessary for the print, but it makes the chopstick rest feel stiffer/higher quality. Likewise, you can print the long faces with a single perimeter (similar to vase mode) but again, the small additional weight and stiffness of using 2 perimeters makes this chopstick rest make it feel higher quality, since it is already so lightweight.
-This chopstick rest is incredibly stable; it is difficult to knock over, and its center of gravity is nearest to the bottom side.

**Update 2023-March-7. The incorrect gcode and .3mf files had been uploaded, and the older file that had been uploaded resulted in gaps in the top surface (as printed). Updated files have been reuploaded with ‘r.1’ in the file names. Thanks to Gary for flagging this. 

Tags