1 / 6
Remixed Minnowboard Turbot Dual case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed this case to fit a MinnowBoard Turbot Dual Ethernet. I fixed the location of the holes a bit. This should…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I remixed this case to fit a MinnowBoard Turbot Dual Ethernet.
I fixed the location of the holes a bit. This should fit now.
Added a lid version with hole for heatsink (e.g. 38x38x30mm).
Post-Printing
Assembly
Four short PC screws used for HDD mounting are needed to secure the board to the bottom tray.
Four**M3 x 25 mm** bolts need to assemble the example bottom and example lid. Insert them through the bottom and screw them directly into the lid. This uses the bolt heads as stand-offs.Category: Electronics