DS212/DSO212/DSO202 Oscilloscope Mini Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very small stand for DS212, DS02 or similar size oscilloscope or some other device.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around.
Although You may use single stand it is more stable and practical to use two of them. Stand is tight enough to keep attached on device even if you lift it up.
Display is kept at 45 degree toward device user which is comfortable.
Print as you like. It does not need support. With 0.10 mm layer height it takes about 19 minutes to print.
Print instructions
Category: Electronics Summary
Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around.
Although You may use single stand it is more stable and practical to use two of them. Stand is tight enough to keep attached on device even if you lift it up.
Display is kept at 45 degree toward device user which is comfortable.
Print as you like. It does not need support. With 0.10 mm layer height it takes about 19 minutes to print.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.10 mm
Infill: 20%