headphone hanger for microphone stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a headphone holder for a microphone stand with a beam width of 10mm, It requires one 3mm hole to be drilled in…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This is a headphone holder for a microphone stand with a beam width of 10mm, It requires one 3mm hole to be drilled in the microphone mount, however most seem to with a hole preinstalled.
Additional hardware needed:
2x M3-20 screws
2x M3-0.50 nuts
the forward screw is to put through the through hole, the rear screw is to clamp over the beam in order to clamp the holder at the proper angle.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: 3dfuel Recycled PLA brown
Category: Audio