Sturdy Wall Mount Headphone Stand

I plan to update this model with alternative versions, cad is available as is step but uses a feature in the timeline for the geometric pattern that will not be editable for most users.  Uses standard #10 construction screws (probably 3.5 to 4mm construction/wood screw), I'm using spax  1 ½" #10 multi-purpose construction screws with a flat head but any similarly sized flat head fastener will work.  If you require something specific please take measurements and let me know.  A thin sheet of cork helps if your wall or your print isn't perfectly flat. I printed mine solid as these cans are 600-750 grams and dear to me but you could probably get by with some infill no problem.  About 150 grams of material for PLA, slightly less for petg and abs if you print solid.  I would recommend using a decently sized brim on this even for pla because the geometry is going to build tension in it which could warp your print.