Filament bag manual suction pump adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.68 – €3.28 net (excluding VAT)
For file: Updated_suction_pump_adapter_0.2mm_PETG_MK3S_3h23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.98 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 3.38 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
【Updated 25-Aug-2023】Attaching a pump to the suction port of a vacuum bag.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 1
- Views
- 420
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
There are commercially available bags that can vacuum-seal the interior to protect filament from humidity, but often the port and pump become misaligned during suction. By attaching this adapter to the suction pump, it is possible to efficiently vacuum-seal without any problems.
・Fits pumps with a cross-sectional diameter of 34mm.
・Use filament : PETG