1 / 4
Raspberry Pi Zero W TARDIS Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by Jason3030's Raspberry Pi 3 TARDIS Case (https://www.thingiverse.com/thing:2430122), I decided to try and…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 46
- Makes
- 0
- Views
- 319
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Jason3030's Raspberry Pi 3 TARDIS Case (https://www.thingiverse.com/thing:2430122), I decided to try and make one for a Raspberry Pi Zero W. Scaled down to 80% before determining placement of Pi Zero card and cutting out access holes.
Printed at .1mm layer height - not the cleanest print but good enough for now.
0.2" (~5mm) standoffs were used, along with 2-56 thread countersink screws.
Didn't have any 2-56 nuts available so used spare standoffs in their place.
Category: Computer