1 / 3
68mm Downpipe Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a simple, easy print bracket for a standard 68mm plastic downpipe.
No supports required, and print settings are not critical. I used a 0.6mm nozzle with a 0.2mm layer height.
I have printed in PLA and the bracket springs apart enough to enable it to be snapped over the pipe should you need to add a bracket to an existing pipe that is already in place.