1 / 5
Samsung A40 Protective case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A protective case that snaps tight around the perimeter of the phone chassis. It May also fit other Samsung phones.
- Rating
- 4.667 / 5
- Likes
- 4
- Downloads
- 143
- Makes
- 2
- Views
- 443
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
A snap-fit Samsung A40 phone case to protect the phone exterior.
It is recommended to print the case on the back face. However, the underside radius form (shape) nearest to the plate is questionable. Further reducing the layer height may improve the shape. Although, some fettling or a light scrape with a sharp craft knife does improve the finish.
Printing Information
- 0.15mm (Quality) layer height.
- 100% infill.
- 0.4mm nozzle diameter.
- Printed using Prusament PLA and PTEG.
- No Support material is required.