Printerbot simple metal Y upgrate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Y-change for Simple metal its an adapter for https://www.thingiverse.com/thing:2023947
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Y-change for Simple metal its an adapter for https://www.thingiverse.com/thing:2023947
using this setup with a bowden will dramatically reduce the weight of the extruder (as seen of photos).
I also recommend moving the Y end stop to the back so you don't lose any Y length and i think that the Z upgrade (https://www.thingiverse.com/thing:2011148) is a god one as well and i use this for the bowden extruder (https://www.thingiverse.com/thing:927428).
For my adapter you need 10xM3 25mm screws and 8xM3 nuts.
Print Settings
Printer Brand:
Printrbot
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2/0.3
Infill:
30-50
Filament: PLA Blue
Category: 3D Printer Parts