Pi 4 ICE tower + 2.5'' SSD option (Look discription for photo view)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed this for a Raspberry Pi4 with a ICE Tower with a 2.5'' SSD in the bottem part. there was no Pi 4 case with…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Designed this for a Raspberry Pi4 with a ICE Tower with a 2.5'' SSD in the bottem part.
there was no Pi 4 case with ICE tower and SSD slot so here you go.
ive used all M3 Screws for this build and a SSD sata to USB type B cable to connect the SSD to the Pi.
Some parts will need supports !. Mostly the plate parts.
Made te plates in Neutral PLA color to get the RGB shine trough.
Print Settings
Printer Brand:
FlashForge
Printer:
Rafts:
No
Supports:
No
Resolution:
200
Infill:
-
Filament: 123-3D filament PLA Post-Printing =============
Category: Other