1 / 1
Gates GT2 Belt Tension Meter Dual Sided — image 1

Gates GT2 Belt Tension Meter Dual Sided

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Inspired by tension meter inspired by Prusa but with a gauge on both sides, optimized for ABS.

Rating
5 / 5
Likes
64
Downloads
667
Makes
3
Views
5,258
Reviews
3

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired by tension meter inspired by Prusa but with a gauge on both sides, optimized for ABS.

I use it to tune the belt tension on all my Voron printers. Since I mainly print ABS it's been optimied to give the best results when printed with ABS.

If you want to fine tune it for another filament or your specific needs, just change the thickness of the base.

 

Tuning guide: Tune the first belt by any given absolute measure (e.g. frequency measurement with your phone). Mark the tension using a sharpie and the tension meter. Adjust the other belts to the same tension.

I found this method much more straightforward than trying to fine tune all belts by frequency.