Circle accuracy test
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.58 – €0.71 net (excluding VAT)
For file: Holes_33m_0.20mm_205C_PLA_ENDER3V2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.64 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 36 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
100mm x 100mm plate with holes from 2mm diameter to 24mm diameter in 2mm increments.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 156
- Makes
- 1
- Views
- 488
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
1mm thick plate with holes of various diameters.
The included print file is for my Ender3 V2 w/spider v1 hot end and .6 nozzle using Inland PLA+ filament and Prusaslicer. For anyone else struggling with this combination of equipment, I attained the best accuracy by using the XY compensation with a value of -.2mm and then adding .4mm to the X and Y axis of the object using the scale adjustment. This would give me exterior dimensions of the object accurate to +/- .1mm, and give me the same tolerance on the inner diameter of any holes/cavities (round, hex or rectangular) larger than 10mm. On anything smaller the tolerance was increased to +/- .2mm