PC4-M10 Filament Filter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.33 – €0.41 net (excluding VAT)
For file: .6mm Nozzle, .3mm Layer, PLA / pc4_m10_filamentfilter_06n_03mm_pla_mk3s_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 24 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A filament filter that snaps on to a PTFE tube, using a PC4-M10 coupler.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 420
- Makes
- 4
- Views
- 2,881
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A filament filter that snaps on to a PTFE tube, using a PC4-M10 coupler.
Put a small piece of foam inside of it and ram a pointy piece of filament through the entire filter several times.
This is to form a hole and remove any chunks of foam that you ripped out with the filament.
For easier insertion you might want to chamfer the end of the PTFE tube.