1 / 2
Jonsbo/Cooltek UMX4 bottom dustfilter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A better dustfilter for the bottom of the UMX4 PC Case
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in PLA, without support
fits a 300x300 printbed
Parts needed:
- dustfilter Material (I used “organza”)
- double sided tape or other method of adhesion
- magnet tape (I ripped it off the old dustfilter)
since the bottom dustfilter is not great on this case I designed a new one which also blocks some ventholes on the bottom.
with its handles the filter can be more easily detached/attached without taking the sidepanels off. The slits in the bottom are there for the screws sticking out (if you mounted fans at the bottom) so you can place the filter without removing the sidepanel, since the filter sits a bit underneath the left sidepanel.