Brad's Compatible Carriage v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TESTING IN PROGRESS, UPDATES ONGOING This is a left-side carriage (y axis) for a lot of typical printer designs. In my…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
TESTING IN PROGRESS, UPDATES ONGOING
This is a left-side carriage (y axis) for a lot of typical printer designs. In my case, this is to replace the carriage in my Solidoodle 2.
This is designed for string (fishing line) drive system. Aside from that and the LM8UU bearings (2x), original solidoodle hardware can be used.
Axis positions, belt/string positions, stepper positions should be very close or the same as the original solidoodle design. Actually, this carriage holds the x stepper about 10mm farther left, which may interfere with some enclosures out there.
This y carriage holds the NEMA 14 x-axis stepper and the 2x smooth rods (centered 40mm apart) that make up the x-axis drive system.
The y carriage itself gets pulled around by fishing line, attached with M3 bolts just above and to the right of the y axis smooth rod.
How I Designed This
fusion 360
Category: 3D Printer Parts