Dust Port for Ryobi Router
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.61 – €4.42 net (excluding VAT)
For file: ryobi-router-r163g-dust-port-v7_02mm_pla_mk3s_4.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.01 excluding VAT (range midpoint).
- Weight reported by the author
- 42 g
- Print time reported by the author
- 4.41 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Router dust port designed to fit my Ryobi R163G Router with Fixed Base.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 246
- Makes
- 4
- Views
- 2,376
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Router dust port designed to fit my Ryobi R163G Router with Fixed Base.
Attached via two small machine screws in existing threaded holes. Dust port is sized to fit a normal 2" inner diameter ShopVac hose.
Print instructions
I designed in the orientation relative to the router. For best results rotate the model so the screw holes are against the print bed. This will minimize the use of support material and all the supported faces will be hidden by the fixed base for better appearance.